Fragola 8600/8700 Series Parker Push-Lok Hose - Sold by the Foot

This item is priced and SOLD BY THE FOOT --- so buy as many continuous feet as you need!

Fragola's 8600 Series Parker Push-Lok General Purpose Hose is the performance standard for a multitude of applications. Push-Lok hose is manufactured to the same rigorous standards as all of Parker's products and performs well when used within the temperature and pressure parameters that it is designed for.

As a rule of thumb when selecting an A-N hose to replace a given size automotive hose, the dash size is the nominal size in 1/16". For example; -10 A-N, is 10/16" or equivalent 5/8" automotive hose. The AN hose, however, will be slightly smaller due to the wall thickness of the hose. Please reference the chart on the specifications tab for the nominal inside diameter of the hose you are interested in.

Fragola Series 8600-8700 Parker Push-Lok General Purpose Hose Features:

• A 250 psi maximum pressure allows for use in most oil, water and fuel applications.
• Synthetic rubber tube is covered with one layer of textile braid combined with an outer layer of synthetic colored rubber.
• Suitable for temperatures ranging from -40°F to +212°F.
• This hose is sized in fractionally, and works well with Fragola's 8000 Series Push-Lite Hose Fittings.

  Click here to view the manufacturer recommended 8600 Series Hose Cutting and Fitting Assembly Processes and Techniques.

  Please note: Many people over tighten the aluminum fitting on the adapter, which distorts the 37 degree seat and may cause a leak. Both the threads and the seat surface should have a drop or two of oil to smooth the tightening process. Please reference the chart below for maximum torque specifications. Another method of tightening is to bring the nut to "hand tight" and then rotate it another 1/4 turn with the proper wrench.