Home > Shop By Vehicle > Cadillac > Cadillac CTS-V (2016+) Gen 3 > Nitrous & Methanol Injection >

Snow Perfromance Stage 1 Boost Cooler (Water-Methanol Injection Kit For Forced Induction Gasoline Engines)
Snow Perfromance Stage 1 Boost Cooler (Water-Methanol Injection Kit For Forced Induction Gasoline Engines)


 
Our Price: $413.99
Sale Price: $359.99
Savings: $54.00


Availability: Usually Ships in 24 Hours
Product Code: M201
Qty:

Description
 


Overview Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler® water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc. Benefits: Cooler Denser Air Charge Achieve 116 Octane Quality Fuel From Pump Gas Safely Run More Boost & Timing Cleans Engine Combustion Of Carbon Build Up Reduce Air Temperatures Greater and More Consistent Than Air to Air Intercooler Features: Made in USA Nickel Plated Methanol Resistant Metal Fittings Industry Leading 300 PSI Pump For More Pressure Than The Competition Adjustable Boost Setting Level Sensor Upgrade and Red LED to Alert User of Low Level Green LED to Alert User When System is Injecting Your Choice of Red, Blue, or Black Methanol Resistant High Temp Nylon Tubing 2 Proprietary Hypersonic™ Nozzles For The Best Atomization on the Market Whats In The Box: 300 PSI UHO (Ultra High Output) Pump 3 Quart Reservoir All Tubing Necessary for Installation 20' ¼ Inch High Temp Nylon Tubing 18" High Pressure Boost Line Adjustable Boost Switch (1-15 PSI) Pig Tail Harness Level Sensor Upgrade 1 Nozzle Holder/Check Valve Combo 2 Hyper-Sonic™ Nozzles Required Hardware Needed For Installation Snow Performance Running S Decal Comprehensive Instructions to Install on Any Forced Induction Vehicle Snow Performance 1-Year Warranty Wiring Diagram Specs & Information Type Of Pump Proprietary 300 PSI UHO Pump, Dual Outlet EPDM Seals, Fully Adjustable, Proprietary Heat Dissipation Flange, (2) 1/4" Push-lock Inlet/Outlet Fittings, Dimensions (4"L x 7 1/4"H x 3 3/4"W - Including Mounting Bracket) Standard Reservoir 3 Qt Reservoir, Black, Snow Performance Logo Red, Dimensions (8.63"L x 10"H x 4.12"W - Including Tabs/Cap) Controller Adjustable (1-15) PSI Boost Switch Nozzle 3 Hyper-Sonic Nozzles (175 ml/min, 375 ml/min, 625 ml/min) Tubing 1/4" O.D. High Temp Nylon Tubing (800 PSI Burst Rating) Accessories Fluid Level Sensor, Green/Red LEDs, Nozzle Holder/Check Valve Combo Fitment All Forced Induction (Supercharged/Turbocharged) Vehicles Warranty Snow Performance 1-Year Warranty

Share your knowledge of this product. Be the first to write a review »