Coils are sold Individually. One Per Cylinder.
--4 cylinder requires 4 Coils
--6 Cylinder requires 6 Coils
--8 cylinder requires 8 Coils.
MADE IN USA!!
Looking for a high powered ignition system? The IGN-1A Race Coil is a smart coil designed to put out 103 mJ per spark, with a longer spark duration (2.9 ms) than what you’d see with a capacitive discharge. When making a lot of boost and generating globs of power engine heat is a huge factor to Engine Spark. Now we have another option besides Ignition boxes to add to stock coils. The IGN1A Coils pack a huge punch in a small package. IGN1a coils are commonly known as smart coils due to the power spark they produce without the need to run an Igniter.
Coil Bracket NON VVTI: Click Here
Coil Bracket VVTI: Click Here
Spark Plug Wires: Click Here
No more expensive and fragile aftermarket ignition boxes. No more remanufactured OEM coils that are hit or miss.
You can choose how you want to order your setup. We offer the Bracket and Stainless Hardware separately if you already have your coils and plug wires.
If you choose we do offer this as a complete kit Bracket, Coils, and Magnacore 8.5mm Premium Plug Wires.
The IGN1A coils are compatible with all aftermarket ECUs on the market. Follow your aftermarket ECUs wiring to setup correctly.
No more need for ignition amplifiers and aftermarket ignition boxes. Say good buy to those stock expensive 2JZGTE coils.
Here is the connector pinout:
A – Ignition signal from ECU
B – Logic ground, connect to ECU ground
C – Spark wire ground, connect to cylinder head
D – Power ground, connect to battery negative
E – 12 volt power
The coil dwell starts when a 5 volt signal is applied to pin A and the coil fires when the voltage drops to zero. The signal is similar to an LSx coil, although it does need a bit more current to trigger.
COIL SPECIFICATIONS
- Output Voltage: up to 81kV +/- 10%
- Output Energy: up to 250mJ +/- 7% (8mS dwell @ 14 volts)
- Peak Secondary Current: 100mA +/- 7%
- Arc Duration: 3.2mS +/- 10% @ 3.0mS dwell target
- Max Continuous Dwell: 9mS not to exceed 40% duty cycle
- Max Intermittent Dwell: 88% duty cycle for 9 sec max
- The IGN1A coils deliver a powerful, long duration spark and are ideal for use in high-boost or high-compression engines.
- This coil is a specially designed inductive style, high energy coil IGBT (Insulated Gate Bipolar Transistor) referred to as a smart coil, as it is designed with the igniter on the coil. (TTL Transistor to Transistor Logic computer systems)
- This coil has the potential of a Massive Spark Energy, (<250mJ, 8mS dwell @ 14 bolt) equal to and typical of the Capacitive Discharge Ignition (CDI) ignition systems, and delivers a very long spark duration that can only be achieved by using inductive coils.
- This Massive Spark Energy <250mJ, and very high voltage, >81kV with incredibly long spark duration of <3.2mS is CRITICAL to maximizing power in high boost or high compression engines.
- These coils are flawlessly being used on 3,000 hp nitrous engines without CDI. This is World Class performance!
- The heavy duty construction is suited to operate in harsh environments and will handle substantial shock, vibration, and is weatherproof. This coil can be mounted virtually anywhere.